TOPRAK

Configured for
Your Field.
Built in Türkiye.

A Turkish brand specialized in tractors and agricultural equipment. Two tractor platforms and eight equipment categories — from the small farm to the large-scale commercial operation.

Request Quote View Products

Philosophy

We Don't Build for Display. We Build for the Field.

TOPRAK exists to deliver practical agricultural equipment to markets where reliability isn't a luxury — it's a survival requirement.

Practical First

Equipment that works in the field, not showroom equipment.

Configured, Not Generic

Every order is matched to the buyer's operation — soil, area, crop type.

Transparent Process

No hidden terms. Clear pricing. Open payment structure.

Turkish Quality

Manufactured to established engineering standards with tested raw materials.

Overview

Two Platforms. One Goal.

Platform	Power	Drive	Weight	Primary Use
TOPRAK 290-A	75 HP	2WD	2,450 kg	Small and medium farms, transport
TOPRAK 290-B	75 HP	4WD	2,755 kg	Higher traction, heavier fieldwork
TOPRAK 290-C	85 HP	2WD	2,490 kg	Higher power without 4WD
TOPRAK 290-D	85 HP	4WD	2,795 kg	Heavy-duty farming operations
TOPRAK 385-A	98 HP	2WD	2,490 kg	Medium to large farms, heavy equipment
TOPRAK 385-B	98 HP	4WD	2,795 kg	Maximum traction, difficult soil

TOPRAK 290

75–85 HP

4 configurations covering 75 and 85 HP in 2WD and 4WD. The 4.248 engine — the shared foundation of every TOPRAK tractor.

Configuration Guide

290-A

75 HP / 2WD / 2,450 kg

Small farms on flat terrain. The most economical option.

290-B

75 HP / 4WD / 2,755 kg

Higher traction with 4WD. Suitable for sandy or clay soils.

290-C

85 HP / 2WD / 2,490 kg

Higher power to operate larger equipment without 4WD cost.

290-D

85 HP / 4WD / 2,795 kg

Highest config. Heavy-duty farming, all soil conditions.

Engine

Model	4.248
Displacement	4,064 cc
Cylinders	4
Injection	Direct injection
Cooling	Water-cooled
Compression	16:1

Power & Torque

Variant	Power	Torque
75 HP	75 HP @ 1,850 rpm	278 Nm @ 1,300 rpm
85 HP	85 HP @ 2,250 rpm	278 Nm @ 1,300 rpm

Transmission

Transmission	8 forward + 2 reverse
Max Speed	24.2 km/h
Clutch	12-inch dual, 300 mm disc

Hydraulics

Control	Depth + Position + Sensitivity
Flow Rate	17–22 litres/min
Max Pressure	260 bar
Lift Capacity	2,500 kg

Additional Systems

PTO	69.5 HP @ 540 rpm — 1,730 rpm
Electrical	12V / 105Ah / 55A / Starter 1.8kW
Brakes	Oil-immersed bronze disc
Steering	Mechanical and hydraulic
Fuel Tank	85 litres

TURBO

TOPRAK 385

98 HP Turbo

Shares the same 4.248 engine base as the 290, but with a turbocharger raising power to 98 HP — spare parts inventory is shared between both models.

385-A

98 HP · 2WD · 2,490 kg

Medium to large farms, heavy equipment

385-B

98 HP · 4WD · 2,795 kg

Maximum traction, harsh conditions

When to Choose the 385 Turbo?

—

Farming areas exceeding 50 feddans

—

Attached equipment requiring PTO power above 70 HP

—

Heavy clay soil or difficult traction conditions

—

Trailer transport with loads exceeding 6 tonnes

Agricultural Equipment

8 Categories. Full Coverage.

Category 1

Cultivator — TOPRAK C-Series

Frame Height: 62 cm · Body Clearance: 25 cm · Working Depth: 15 cm

Model	Tines	Weight	Width	Power
C-5	5	294 kg	125 cm	40–50 HP
C-7	7	400 kg	175 cm	50–60 HP
C-9	9	481 kg	225 cm	60–70 HP
C-11	11	585 kg	275 cm	70–80 HP
C-13	13	727 kg	325 cm	80–100 HP
C-15	15	800 kg	375 cm	100–120 HP

Use: Breaking up topsoil and eliminating weeds before planting.

Category 2

Disc Plough — TOPRAK DP-Series

Disc: 660 mm · Frame Height: 68 cm · Depth: 26 cm

Model	Discs	Weight	Width	Power
DP-2	2	364 kg	50–70 cm	40–50 HP
DP-3	3	423 kg	70–100 cm	50–60 HP
DP-4	4	555 kg	90–130 cm	60–70 HP
DP-5	5	664 kg	110–160 cm	80–90 HP
DP-6	6	770 kg	130–190 cm	90–110 HP

Use: Primary tillage of virgin or compacted soil.

Category 3

Plough — TOPRAK PL-Series

Blade Spacing: 76 cm · Frame Height: 68 cm · Depth: 30 cm

Model	Blades	Weight	Power
PL-1	1	160 kg	20–25 HP
PL-2	2	223 kg	25–30 HP
PL-3	3	335 kg	30–35 HP
PL-4	4	518 kg	35–40 HP
PL-5	5	647 kg	50–60 HP
PL-6	6	800 kg	70–80 HP

Use: Deep tillage and soil turning. Primary option for land preparation.

Category 4

Disc Harrow — TOPRAK DH-Series

Disc: 460 mm · Spacing: 19 cm · Depth: 10 cm

Model	Discs	Weight	Width	Power
DH-20	20	600 kg	190 cm	45–55 HP
DH-24	24	685 kg	228 cm	55–65 HP
DH-28	28	770 kg	266 cm	65–75 HP
DH-32	32	820 kg	304 cm	75–85 HP
DH-36	36	840 kg	342 cm	85–100 HP

Use: Smoothing soil after ploughing and preparing it for seeding.

Category 5

Sprayer — TOPRAK SP-Series

Model	Capacity	Pump	Flow	Pressure	Weight
SP-400	400 L	C71	71 L/min	40 bar	137 kg
SP-600	600 L	GT80	80 L/min	40 bar	156 kg
SP-1000	1,000 L	GT105	105 L/min	40 bar	210 kg
SP-2000	2,000 L	GT96	96 L/min	50 bar	478 kg

Use: Spraying pesticides and liquid fertilizers.

Category 6

Fertilizer Spreader — TOPRAK FS-Series

Model	Capacity	Weight	Spread
FS-350	350 L	80 kg	16–18 m
FS-600	600 L	150 kg	16–20 m

Use: Spreading granular fertilizers with even distribution. Up to 20 m spread range.

Category 7

Trailer — TOPRAK TR-Series

Model	Payload	Volume	Power
TR-4	4,000 kg	5 m³	50–60 HP
TR-6	6,000 kg	9.6 m³	50–60 HP
TR-8	8,000 kg	11.4 m³	60–80 HP
TR-10	10,000 kg	14.3 m³	80–100 HP

Use: Transporting crops and materials. TR-10 features dual axles for stability.

Category 8

Land Leveller — TOPRAK LS-Series

Frame Height: 55 cm

Model	Width	Weight	Power
LS-100	100 cm	165 kg	15–25 HP
LS-120	120 cm	175 kg	15–25 HP
LS-140	140 cm	200 kg	15–25 HP
LS-160	160 cm	220 kg	25–35 HP
LS-180	180 cm	230 kg	25–35 HP
LS-200	200 cm	240 kg	35–50 HP
LS-220	220 cm	250 kg	40–50 HP
LS-240	240 cm	260 kg	50–60 HP
LS-250	250 cm	275 kg	60–70 HP
LS-300	300 cm	310 kg	70–80 HP

Use: Levelling land for planting or irrigation. Essential in flood irrigation systems.

Comparison

Why TOPRAK

Criterion	TOPRAK	European	Asian
Price	Competitive — lower than European	High	Low
Quality	Established Turkish standards (46 years)	High	Variable
Spare Parts	Shared — unified 4.248 engine	Authorised dealer	Variable quality
Climate Fit	Designed for similar conditions	Requires adaptation	Different markets
Maintenance	Mechanical — no specialist needed	Complex technologies	Less durable parts
Flexibility	6 configs + 8 equipment categories	Limited	Limited
Support	IDEX — direct presence	Dealers (if available)	Limited

European-level quality at an acceptable price, with maintenance that doesn't require a specialist.

How to Order

Step-by-Step Process

01

Contact

Reach the IDEX team through any channel. Specify products and target market.

02

Assessment

We understand your operations: soil, area, crops — and recommend the right configuration.

03

Quotation

Detailed quote: products, configs, shipping, payment terms — everything clear.

04

Confirm & Produce

After approval and initial payment, your order is scheduled in production.

05

Inspect & Ship

Final quality inspection + complete shipping and insurance documentation.

06

Deliver & Support

After delivery: technical support and spare parts through IDEX network.

After-Sales

Our Commitment After Delivery

Genuine Spare Parts

Available with direct shipping from Turkey.

Unified Engine

4.248 base shared — significant parts are interchangeable between models.

Wide Compatibility

Many components are available in local markets.

Technical Support

IDEX team available for remote support and local team guidance.

Documentation

Every tractor delivered with complete operation and maintenance manual.

What We Expect from Partners

1

A trained maintenance technician (we support training)

2

Basic inventory of consumable spare parts

3

A service point accessible to the end user